正如介绍中所说，选择这个版本的美国队长完全是孑木的个人偏爱，他喜欢电影《美国队长2: 冬日战士》和这一版的制服和形象。对于有多个版本的同一角色，只会在众多版本中挑一个他最喜欢、最想雕塑的形象进行创作，把这个角色的五官完全研究透彻，一直雕塑到他满意为止，然后作为正式作品发布。而关于美国队长这个角色，或许会有胡子美队（CA2018）吧，因为胡子美队形象和年龄上的差异性更大一些，这样才有研究的价值和创作的新鲜感，但孑木不会在一个时期连续重复雕塑同一个角色，因为需要时间去忘掉已经创作的东西，然后再带着新的角度去重新审视一个人物，所以那也是未来计划的事情了，请关注官网“计划”页面,

As stated in the introduction, it is entirely Jim’s personal preference to select this edition of Captain America. he likes movie “Captain America:The Winter Soldier ” and the uniform and image of this edition. For the same role with multiple editions，he will only pick the one he likes the most, the most one he wants to sculpt among many editions, study the character’s features thoroughly, keep sculpting until he is satisfied, and then release it as the official artwork. And about the role of Captain America, maybe there will be the bearded Captain America(CA2018), because bearded Captain America has a greater difference in image and age, This will make it worthwhile to study and fresh to create, but He also does not sculpt the same character continuously and repeatedly in one period, because it takes time to forget what has been created, and then re-examine a character with a new perspective, so that is also a future plan, please pay attention to the official website “Plan” page.

1.因为这是孑木从传统泥塑转向3d雕刻制作的过程，一直在和机器与软件做磨合，这么多版本也是孑木升级工艺的过程中产生的结果。在第一代雕刻工艺下制作了1.0系列，第二代雕刻工艺下制作了2.0系列，第三代雕刻工艺下制作了3.0系列，第四代雕刻工艺（详情见：第四代肖像制作工艺）下制作了4.0系列，头雕正式作品发布版本是4.0系列，更具体点是4.2系列。（关于版本命名见：头雕版本命名）

2.多版本的制作也是电脑制作的一个优势所在，就是可以多版本进行对比与修改，因为没有一个角色当时那个状态的360度照片，所以很多结构是试错法，需要做很多版本进行尝试，从而选出最好的那个一版，这是孑木的一个制作工艺流程，因此也会产生很多的版本，但不是所有的版本都打印和发布。

3.由于即便是同一年埃文斯生活形象也和电影形象差异很大，而且同一部电影的形象也有很大的差异，并且没有很好的正面表情素材，孑木只有采取组合表情的制作方式，因此会有多版本的尝试。

4.由于虚拟模型和现实模型并不完全是一模一样的，并且虚拟模型，打印模型，涂装模型的相分离，也造成了模型雕塑不能及时的修改，必须等涂装完毕才能看到最终效果进行瑕疵修改，正式发布的时候会根据上一次的涂装再修改，因此创作是一个动态过程，这才是符合客观规律的，而不是样板作品涂的很好，后面就陆续的作品变得糟糕，相反是越来越好。

5.并且涂装创作不是机器生产，每个作品的涂装也不是完全一致，即便是同一版本，随着涂装者的状态和心境，和对于雕塑者创作的理解过程，都可能会对于肖像作品涂装产生影响。（详情见：涂装作品的差异化）。

6.因此本次正式作品将会是多版本发布（不过这种多版本只是小版本的变化(V4.2.x)，表情和结构不会有大的变化），从之前过往中间测试版本的经验来看，不管是涂装还是模型都在向着更好的方向发展。因此最终15件作品要么可能是版本不一样，要么可能是涂装不一样，不会完全一致，整个过程也区别与传统的商业作品售卖，而是孑木在支持者的支持下追求更好的作品的动态过程，没有最好的作品只有更好更接近人物的作品，孑木想要尽可能的给自己和支持者更好的作品。也因为哪怕是同一作品，孑木也想给每位支持者都有稍微不同区别与其他支持者的作品，而不是如工业化生产那样全都是同质化一模一样的东西，这也是手工作品的特别之处和魅力所在。

1.For Jim，this is a process of switching from traditional clay sculpture to 3d sculpture, He kept adapting to machines and software, So many versions are also the result of the process of upgrading.He sculpted the 1.0 series in the first generation of sculpture crafts, sculpted the 2.0 series the second generation of sculpture crafts, sculpted the 3.0 series in the third generation of sculpture crafts,  sculpted the 4.0 series in the third generation of sculpture crafts(details: the 4th generation of portrait production craft).The version of the official head sculpture work is the 4.0 series, more specifically is the 4.2 series.(For version names see: head sculpture version naming)

2.This is one of the advantages of computer production is that multiple versions can be compared, because there is no 360-degree photo of a character in that state, so many structures are trial-and-error methods, and many versions need to be made to try, so as to select the best one. This is a jim’s sculpture crafts process. Thus many versions are also produced, but not all of them are printed and released.

3.Due to even the same year Evans life image and the movie image is very different, and the image of the same movie also has a big difference, and there is no good reference to the front expression, Jim only takes a combined expression approach to portrait making, so there will be multiple versions to try,.

4,Since the virtual model is not exactly the same as the real one, and due to the separation of the virtual model, printed model and painted model, the model sculpture cannot be modified in a timely manner. It must wait until the paint is finished to see the final result for flaw corrections. the official release will be based on the last painting and then modified, so creation is a dynamic process, which is in line with the objective law, instead of the sample piece being painted well and then the successive pieces behind it getting bad, it should be getting better and better.

5.Painting is not a machine production, and each work is not exactly the same, even if it is the same version, with the state of the painter and state of mind, and the process of understanding the creation of the sculptor, all may have changes to the painting of the portraits. For more information on this. (see detail: Differentiation of painted artworks).

6. Therefore, this official work will be multi-version release(However, this multiple version is only the minor version(V4.2.x)of the change, and there will be no major changes in expression or structure). From the experience of previous intermediate test version, both the paint and the model are moving in a better direction，What has been confirmed is that the version of CA2014N02  is V4.2.15. So the final 15 sets of works either may be different versions, or may be painted differently, will not be exactly the same, the whole process is also different from the traditional model of selling commercial works, but rather a dynamic process in which Jim pursues better works with the support of his supporters, there is no best work, only better and closer to the character, Jim wants to give himself and his supporters the better work as far as possible. Also because even the same artwork, Jim also wanted to give each supporter something slightly different artwork from the rest of the supporters, rather than the industrial products that are all exactly the same things,that’s what makes handmade work so special and fascinating.

• 整个作品的流程是

• 制作周期和邮寄时间

因为定制品涂装需要时间，并且证书和感谢卡都是根据每个赞助人的姓名量身制作，有时孑木还要更新模型，所以在达成赞助后，一般是1-2个月完成全部制作然后才能统一邮寄。

• 快递风险责任

受赠者收到作品后请检查作品的完好性、完整性，如果作品没有问题，请通过邮件或社交账号向我们反馈确认（工作室邮件地址：jimsculpt@outlook.com），如果作品在快递过程中有损坏，请立即联系我们并且帮助我们销毁问题作品，之后我们会为受赠者补做问题作品，受赠者确认后将自己对作品负责，如果今后有损坏，我们也不再会重新打印，这违背了作品的不可复制原则，比如运输途中N02号损坏，我们会为受赠者重新制作N02号，坏的销毁，对于正式作品的N02号在孑木和K完成创作后，过去，现在，未来有且只能有唯一一个在世间。

• 快递公司和运费支付方式

国内外邮寄默认使用顺丰快递，内地由工作室支付运费，港澳台地区和韩国使用到付运费。美国及其他国家使用DHL快递根据具体地址收件方支付邮费。

以下是快递查询网址：

顺丰快递：https://www.sf-express.com/

DHL Express: https://www.dhl.com/global-en/home.html

• 整个作品的流程是

  ①孑木和K制作N01号作品并发布， 并且之后会一直更新每个单独编号的作品并发布照片
  ②支持者看到作品后发出赞助意向邮件
  ③了解支持者并且询问其赞助的真实有效性
  ④孑木决定并发出赞助邀请函
  ⑤支持者确定并向我们给定的账号转账
  ⑥依支持者量身定制作品
  ⑦向支持者发送作品
  ⑧邮寄收到后支持者检查并确认作品

• Production period and Shipping time

Because custom painting takes time, and certificates and thanking cards are tailored to each patron’s name, sometimes Jim will update the model. So after a patronage is agreed upon, it is usually 2-3 months to complete all artwork, and all artworks are shipped uniformly after all the works have been created.

• Shipping Risks

Recipient after receiving the work, please check the integrity and completeness of the  artwork, If there is no problem with the artwork, please send us feedback via social media account or email to confirm (studio email address: jimsculpt@outlook.com), if the work is damaged during the delivery process, Please contact us immediately and help us destroy the defective artwork, after which we will make up the defective artwork for the recipient.. The recipient will be responsible for the artwork after confirmation, if there is damage in the future, we will no longer reprint and recreat, because this will violates the principle of non-replicability of the artwork. For example, if N02 is damaged in transit, We will recreate the N02 for the recipient, and bad works will be destroyed. For the official work of N02, after Jim and K completed their creation, there was, is and will be only one, and should be only one, in the world.

• Courier and Shipping Payment Methods

Chinese and international mail default use SF Express, Hong Kong, Macao, Taiwan and South Korea use freight collect. the United States and other countries use DHL Express, recipient pays shipping costs.

The following is the tracking number inquiry website：

SF Express：https://www.sf-international.com/

DHL Express: https://www.dhl.com/global-en/home.html

• The flow of the work is as follows

  ①Jim and K will create and post the N01 artwork, and will keep updating and posting photos of each individual numbered artwork.
  ②The supporter sees the work and sends patronage intention emails.
  ③Check out the supporters and ask them about the validity of their patronage.
  ④Jim decides and sends out the invitation letter for patronage.
  ⑤The supporter confirms and transfers the money to the given account.
  ⑥Customize the artwork according to the supporter
  ⑦Send the artwork to the supporter
  ⑧Check and confirm the artwork by the supporter after receiving the artwork .

孑木的肖像作品定位是手办观赏工艺品并不是玩具，虽然为了满足一些支持者适配素体的需求，我们专门配备了脖塞，但是头雕是打印制品，在前两三个月打印品具有韧性和抗摔性，但随着时间的变迁，打印品会变的越来越脆，这是由于打印树脂的特性决定的，虽然我们已经用了最好的树脂而且全实心打印，但只是延长时间而不能改变这一特性，它的耐磨性和抗摔性仍然不如玩具制作所通常使用的pvc材料，所以在大部分时期和后期，还是不建议收藏者经常性插拔头雕拿在手中把玩，只建议在干燥和常温的环境中放在胸像或素体上作为观赏作品，以免损坏。

Jim‘s’ portrait artworks positioning is ornamental handicraft and not toys, although in order to meet the needs of some supporters to fit the toy body, we are specially equipped with a neck plug, but the headsculpture is a printed product, printed product have toughness and drop resistance in the first three or four months, but with the change of time, the printed product will become more and more brittle, this is due to the characteristics of the printing resin, although we have used the best resin and all solid printing, but only to extend the time and not to change this characteristic, Its abrasion resistance and drop resistance is still not as good as the pvc material usually used in toy production. So for most of the period and later, It is still not recommended that collectors frequently plug and unplug the head sculpture, only recommended to be placed on the bust or toy body as an ornamental artwork in the dry and room temperature environment to avoid damage.